IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 139 / 296

Ethernet Menu
Item Value Description
NW FRAME AUTO*
ETH II
802.2
802.3
SNAP Selects the Netware frame type.
v
AUTO—the printer uses the frame type of the first frame
it receives.
v
ETHER II—the printer uses the Ethernet Standard Version
2 frame type.
v
802.2—the printer uses the IEEE 802.2 protocol.
v
802.3—the printer uses the IEEE 802.3 protocol.
v
SNAP—the printer uses the SNAP protocol.
Note: This menu item appears only when NETWARE is
ON.
NETBIOS ON*
OFF Turns NetBIOS communications on or off.
v
ON—enables NetBIOS communications.
v
OFF—disables NetBIOS communications.
APPLETALK ON*
OFF Turns AppleTalk communications on or off.
v
ON—enables AppleTalk communications.
v
OFF—disables AppleTalk communications.
Coaxial SCS Menu
Use the Coaxial SCS Menu to define how the printer handles SCS data over
the coax attachment. The following table describes the settings you can
change from the Coaxial SCS Menu. An asterisk (*) next to a value in the table
indicates the factory default. The Coaxial SCS Menu appears only if you have
the coax network interface card installed.
Notes:
1.
To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in print jobs override Coaxial SCS Menu values set at the
printer.
3. For more information about configuring the coax attachment, see
Twinax/Coax Configuration Guide.
4. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 23 and “Navigating
Menus” on page 24 before continuing.
Chapter 6. Operator Panel Menus
127