IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 115 / 296

Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in print jobs (either by the print application or the printer
driver) override values you set at the printer.
3. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 23 and “Navigating
Menus” on page 24 before continuing.
Config Menu Item Value Description
JAMRECOVERY OFF*
ON Sets the JAMRECOVERY function on or off for non-IPDS
jobs. (For IPDS jobs, the host always does a recovery.)
v
OFF—the printer does not keep an image of the printed
page. Jammed pages might not be reprinted.
v
ON—the printer keeps the image for a printed page until
the page successfully exits the printer. Jammed pages are
automatically reprinted. Selecting ON can decrease the
performance of your printer.
AUTOCONTINU ON*
OFF Sets the auto-continue function on or off.
v
ON—following certain types of errors (such as memory
allocation errors), the printer pauses for thirty seconds,
and then continues running. Since some errors may cause
data to be lost, setting AUTOCONTINU to ON can cause
the printer to continue printing without operator
intervention even though data has been lost.
v
OFF—following the same types of errors, the printer
stops and waits for operator intervention. (Generally, the
operator either presses the Enter key to continue printing,
or the Cancel Print key to cancel the current job.)
DENSITY n Sets the toner density. n can be from 0 to 6 where 0 is the
least dense (lightest) and 6 is the most dense (darkest). 3 is
the default value.
Notes:
1. Increasing density may make documents appear darker;
however, it also uses more toner, which decreases the
page yield of your toner cartridge.
2. Decreasing toner density may improve image clarity.
3. Density may have little effect on large black areas,
unless the Config Menu QUALITY item is set to
ECONO.
Chapter 6. Operator Panel Menus
103