IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 230 / 296

Symptom Action
Paper selected from wrong
source The printer automatically looks for paper in other trays when the
following situations occur:
v
The requested tray contains the wrong size paper.
v
The requested tray is empty and the Paper Menu TRAY SWITCH
item is ON.
If the printer cannot find the correct size paper in any tray, it
displays 011 LOAD <paper-size> IN <tray>, where the tray is the
last
tray it looked in, not necessarily the tray you specified.
Responses
:
1. To turn tray switching off for empty tray conditions, set the
Paper Menu TRAY SWITCH item to OFF.
2. To remove a specific tray from the automatic tray switching
sequence, set the value to ON in the following Paper Menu
items, as appropriate: AUXTRAYPROT, TRAY1 PROT, TRAY2
PROT, TRAY3 PROT, TRAY4 PROT, TRAY5 PROT, or
ENVTRAYPROT.
3. Tray switching is automatic when the printer detects the wrong
size paper in the requested tray. You cannot turn this type of
switching off; nor can you “protect” trays from being included
in this switching sequence.
Tray switching does not work Responses :
1. Make sure TRAY SWITCH is set to ON on the Paper Menu. See
“Paper Menu” on page 95.
2.
Tray switching does not occur when two trays have the same
size paper but different orientations. For example, if Tray 1 and
Tray 3 both have letter-size paper, but Tray is short-edge feed
and Tray 3 is long-edge feed, tray switching will not occur.
Reload the paper so that the orientation matches. See
“Chapter 4. Paper Handling” on page 33.
Pages lost after clearing paper
jam Set JAMRECOVERY to ON in the Config Menu or using the printer
driver. (The driver setting overrides the menu setting.) See
“Configuration (Config) Menu” on page 102. Note that this will
decrease performance.
218
Infoprint 32 and Infoprint 40: User’s Guide