IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 185 / 296

a.
Lay the token-ring card in front of you with the faceplate towards
you.
b. On the right, rear side are six pins and two small jumpers.
v
If you are installing the card for a 4Mbps network, place a jumper
over the pins labeled 4.
v
If you are installing the card for a 16Mbps network, place a jumper
over the pins labeled 16.
3. Switch off the printer.
Attention:
Do not switch the power off if the printer is printing a page.
This action jams the printer.
4. Unplug the printer.
5.
Remove the power cord from the back of the printer.
6.
Two slots for interface cards are located at the left side of the back of the
printer. If you are installing only one card, use the left slot.
Chapter 8. Installing Printer Options
173