IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 228 / 296

Symptom Action
No display messages No message is in the message display area.
Response : The printer may not be turned on or the power cord has
become unplugged. Press the | on the power switch to power on
the printer. Make sure the power cord is plugged in.
Changed toner cartridge and the
printer does not work Response : Turn off the printer. Open the printer and reseat the
toner cartridge. Keep the toner cartridge level to avoid spilling
toner. Make sure you remove all tape and packaging material,
including the yellow tape at the end of the cartridge. See “Changing
the Toner Cartridge” on page 144.
Printer configuration page
problems. Response : Make sure the PAGESIZE item on the PCL Menu is set to
Letter, A4, or a larger paper size. To verify and change the
PAGESIZE item:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PCL MENU in the display.
3. Press the Item key until you see PAGESIZE=size* in the display,
where size is the current default.
4. If size is smaller than LETTER or A4, press the Value key until
you see LETTER, A4, or a larger size paper.
5. Press the Enter key to select the new size. An asterisk appears
next to the value, showing that it is active.
Now try printing the configuration page again. If necessary, restore
the PAGESIZE value in the PCL Menu after the configuration page
successfully prints.
216
Infoprint 32 and Infoprint 40: User’s Guide