IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 23 / 296

Chapter 2. Installing Your Printer
Quick Setup Poster
To set up your printer, see Quick Setup Poster, which is shipped with the
printer. Use this checklist as a supplement to Quick Setup Poster.
Installation Checklist
__ 1. Unpack your printer. See “Unpacking and Setting Up the Printer” on
page 12.
__ 2. Load the paper tray shipped with your printer. See:
v
Quick Setup Poster
v
“Loading Paper and Envelopes into the Printer” on page 39.
__ 3. Install the toner cartridge. See:
v
Quick Setup Poster
v
“Changing the Toner Cartridge” on page 144.
__ 4. Apply the operator panel overlay (if it has not already been applied to
the operator panel). See “Applying the Operator Panel Overlay” on
page 14.
__ 5.
Switch on the printer. See “Powering On the Printer” on page 16.
__ 6.
Select a language for messages and menus (the default is English). See
“Selecting a Language” on page 17.
__ 7.
Print the printer configuration page to verify the printer works. See
“Printing the Printer Configuration Page” on page 25.
__ 8. Connect a parallel cable (if desired). See “Connecting the Parallel
Cable” on page 18.
Note:
In addition to the parallel cable attachment, the Infoprint 32
and Infoprint 40 support a wide variety of network attachment
interfaces, including twinax, coax, token ring, and Ethernet
attachments. For information about installing network
attachments and other optional features, please read “The
Network Interface Card” on page 172.
__ 9.
Install other options, such as the 2500-Sheet Input Unit, extra memory,
the IPDS SIMM, flash memory, the hard drive, and network interface
cards (Ethernet, token ring, twinax, and coax). See “Chapter 8.
Installing Printer Options” on page 165.
© Copyright IBM Corp. 1998, 1999
11