IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 146 / 296

Twinax SCS Menu
Item Value Description
APO ENABLE*
DISABLE Enables or disables automatic print orientation.
v
ENABLE—if the requested dimensions of the job fit on
the paper, the page is printed either in portrait or
landscape, whichever better fits the dimensions. If the
requested dimensions do not fit on the paper, the default
orientation for the tray (COR, PORT, LAND, or C-PORT)
determines how the sheet is printed.
v
DISABLE—the page prints using the default orientation
for the tray (COR, PORT, LAND, or C-PORT).
Notes:
1. Values specified in the data stream override values set at
the printer.
2. The factory defaults (orientation set to COR and
APO=ENABLE) give you the most flexibility.
3.
The requested dimensions are determined by the values
of CPI, LPI, MPP, and MPL for the job. These values can
be set in the data stream. CPI and LPI can be set on the
Twinax SCS menu. The twinax default values for MPP
and MPL cannot be set from a menu; they are 132 for
MPP and 62 for MPL.
Coax Setup Menu
Use the Coax Setup Menu to configure the coax attachment. The following
table describes the settings you can change from the Coax Setup Menu. An
asterisk (*) next to a value in the table indicates the factory default. The Coax
Setup Menu appears only if you have the coax network interface card
installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. For more information about configuring the coax attachment, see
Twinax/Coax Configuration Guide.
3. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 23 and “Navigating
Menus” on page 24 before continuing.
134
Infoprint 32 and Infoprint 40: User’s Guide