IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 20 / 296

v
Norway: 800-11389
v
Spain: 900-983131
v
Sweden: 020-794270
v
United Kingdom: 0800-968679
The following table lists supplies for the Infoprint 32 and Infoprint 40. See
“Chapter 7. Maintaining the Printer” on page 143 for more information.
Supply Part Number
Toner Cartridge 90H3566
Usage Kit (100 Volt) (Japan only) 90H3569
Usage Kit (120 Volt) 90H3567
Usage Kit (230 Volt) 90H3568
Staple Refill 90H3570
Staple Cartridge (with staples) 90H3571
Memory Requirements
Table 1 on page 9 shows the minimum memory requirements for Infoprint 32
and Infoprint 40.
Notes:
1. The PAGEPROT menu item is available on the PCL Menu, the PostScript
(PS) Menu, and the IPDS Menu. It determines whether or not the printer
uses compression when it prints complex pages.
v
PAGEPROT=AUTO—the printer uses compression when it runs into
memory constraints. This can reduce print speed and requires less
memory than PAGEPROT=ON.
v
PAGEPROT=ON—the printer does not use compression and therefore
requires more memory.
2.
When a column contains two values, the second value indicates the
amount of memory required to support context saving. Context saving
allows the printer to remember information about the current data stream
when it switches back and forth from one job type (PostScript or PCL5e)
to another. The printer always does context saving for IPDS.
The Memory Configuration (MEMCONFIG) Menu provides two menu
items, PCL SAVE and PS SAVE, which allow you to set context saving on
or off for each of these two data streams. These menu items are displayed
only if there is enough memory in the printer to permit context saving.
3. If you use Japanese DBCS (double-byte character set) PostScript fonts, IBM
recommends that you have at least 16MB of memory.
8
Infoprint 32 and Infoprint 40: User’s Guide