IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 143 / 296

Coaxial SCS Menu
Item Value Description
PA1 none Selecting this value and pressing the Enter key sends a PA1
signal to the host.
Note:
This applies to SCS only; not DSC/DSE or IPDS.
PA2 none Selecting this value and pressing the Enter key sends a PA2
signal to the host.
Note:
This applies to SCS only; not DSC/DSE or IPDS.
Twinax SCS Menu
Use the Twinax SCS Menu to define how the printer handles SCS data over
the twinax attachment. The following table describes the settings you can
change from the Twinax SCS Menu. An asterisk (*) next to a value in the table
indicates the factory default. The Twinax SCS Menu appears only if you have
the twinax network interface card installed.
Notes:
1.
To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in print jobs (either by the print application or the printer
driver) override Twinax SCS Menu values set at the printer.
3. For more information about configuring the twinax attachment, see
Twinax/Coax Configuration Guide.
4. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 23 and “Navigating
Menus” on page 24 before continuing.
Chapter 6. Operator Panel Menus
131