IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual Download Page 70

Page: 70 / 296

Pull out the paper tray until it stops.

hc3u208F

While pulling the gray handle toward you, slide the rear guide to the
position for your paper size. Make sure the rear guide locks into place.

Prepare a stack of paper.

Fan the paper stack to loosen any pages that are stuck together.

Make sure that the tops of the sheets are properly aligned.

Infoprint 32 and Infoprint 40: User’s Guide

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer









































































































































































































































































































Search results

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer

Reviews:

Related manuals for 4332-004 - InfoPrint 40 B/W Laser Printer

Brands by name

Popular brands

IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Search results

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer

Reviews:

Related manuals for 4332-004 - InfoPrint 40 B/W Laser Printer

Brands by name

Popular brands