IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 105 / 296

PCL Menu item AUTO RESET is set to OFF, you may not get the READY
prompt even if you see the WAIT FOR IDLE PRINTER message. In this
case, set AUTO RESET to ON to restore Test Menu functions.
Test Menu Item Description
CONFIG PAGE Prints the printer configuration page. Make sure Letter or A4 paper is
loaded in the default tray. See “Selecting the Default Input Tray” on page 64
for more information.
PRINT PS FONTS Prints a list of PostScript fonts installed on the printer. See “Printing a List
of PostScript Fonts” on page 29 for more information.
PRINT PCL FONTS Prints a list of PCL5e fonts installed on the printer. See “Printing a List of
PCL5e Fonts” on page 29 for more information.
DEMO PAGE Prints the demo page.
CONTINUOUS TEST Prints continuous test pages. To stop the test, press the Cancel Print key.
PRINT TR CONFIG Prints a configuration page for the token-ring network interface card. See
“Printing the Token-Ring Network Interface Card Configuration Page” on
page 29 for more information.
PRINT EN CONFIG Prints a configuration page for the Ethernet network interface card. See
“Printing the Ethernet Network Interface Card Configuration Page” on
page 28 for more information.
PRINT IPDS FONTS Prints a list of IPDS fonts installed on the printer.
PRINT SCS CHARS Prints the SCS code page (character set).
FORMAT DISK Formats the optional hard drive.
Note:
If you have a pre-loaded IPDS DBCS (double-byte character set) hard
drive, do not use FORMAT DISK or you will erase the pre-loaded data.
ONLINE HEX PRT
CANCEL HEX PRT ONLINE HEX PRINT prints a hexadecimal dump for troubleshooting
purposes. Use this option for PostScript or PCL jobs sent over the parallel,
Ethernet, or token-ring attachments. After you select this item, it changes to
CANCEL HEX PRT. To cancel the dump, select CANCEL HEX PRT.
Note:
Do not use ONLINE HEX PRT for IPDS jobs.
CX HEX PRT
CANCEL CX PRT CX HEX PRT prints a hexadecimal dump for troubleshooting problems with
non-IPDS jobs sent over the coax attachment. After you select this item, it
changes to CANCEL CX PRT. To cancel the dump, select CANCEL CX PRT.
Note:
Do not use CX HEX PRT for IPDS jobs.
TX HEX PRT
CANCEL TX PRT TX HEX PRT prints a hexadecimal dump for troubleshooting problems with
non-IPDS jobs sent over the coax attachment. After you select this item, it
changes to CANCEL TX PRT. To cancel the dump, select CANCEL TX PRT.
Note:
Do not use TX HEX PRT for IPDS jobs.
Chapter 6. Operator Panel Menus
93