IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 141 / 296

Coaxial SCS Menu
Item Value Description
APO ENABLE*
DISABLE Enables or disables automatic print orientation.
v
ENABLE—if the requested dimensions of the job fit on
the paper, the page is printed either in portrait or
landscape, whichever better fits the dimensions. If the
requested dimensions do not fit on the paper, the default
orientation for the tray (COR, PORT, LAND, or C-PORT)
determines how the sheet is printed.
v
DISABLE—the page prints using the default orientation
for the tray (COR, PORT, LAND, or C-PORT).
Notes:
1. Values specified in the data stream override values set at
the printer.
2. The factory defaults (orientation set to COR and
APO=ENABLE) give you the most flexibility.
3.
The requested dimensions are determined by the values
of CPI, LINE SPACING, MPP, and MPL for the job.
These values can be set in the data stream or on the
Coaxial SCS Menu.
LPI 6*
8
0 Specifies a default lines per inch value for jobs received
over the coax attachment. Valid values are 0, 6, and 8. The
default is 6 lines per inch. 0 specifies either the value
specified in the job, or the PCL default value for the printer.
LINE SPACING 1*
2 Specifies single or double spacing:
v
1—single spacing
v
2—double spacing
CPI nn.n Specifies the default characters per inch, or pitch. nn can be
0, 10, 12, 15, 16.7, 20, or 27. The default is 10 characters per
inch. 0 specifies a proportional font (FGID 1452). Note that
proportional fonts use proportional spacing, which may
cause unexpected results (for example, tabular data may
appear misaligned).
CASE DUAL*
MONO Specifies the case of the printed text:
v
DUAL—characters print in the case received
v
MONO—all characters print in uppercase
MPL nnn Specifies the maximum page length (MPL) in lines per page.
Valid values are 0 to 255. 66 is the default.
MPP nnn Specifies the maximum print position (MPP). Valid values
are 0 to 255. 132 is the default.
Chapter 6. Operator Panel Menus
129