IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 120 / 296

PCL Menu Item Value Description
FORM nnn LINES Specifies the number of lines per page the printer prints
before it starts a new page. nnn can be from 5 to 128. 60 is
the default for Letter-size paper; 64 is the default for A4-size
paper.
Note:
When you change FORM, the printer actually
calculates a new LPI (lines-per-inch) value, rather than an
absolute value. This means that if you change FORM for
one page size, the printer changes the FORM value for
other page sizes. For example, if you set FORM to 40 while
LETTER is the default PAGESIZE, and you then change
PAGESIZE to A4, the new A4 FORM value will be 42, not
40 (the value you set) or 64 (the printer default). To restore
the default values, either change FORM back to its original
value or enter the FACTORY DEFAULT item on the Test
Menu.
FNTSRC INTERNAL*
DISK
FLASH
SOFT Specifies which font source the printer checks first for a
specified font:
v
INTERNAL—use the printer’s resident fonts first
v
DISK—use fonts stored on the printer hard drive first
v
FLASH—use fonts stored on the flash SIMM first
v
SOFT—use downloaded fonts first
FONTNUM nnn Specifies the default font. nnn is the number of the font.
The default is 0. To display a list of available fonts and their
corresponding numbers, select PRINT PCL FONTS from the
Test Menu. See “Printing a List of PCL5e Fonts” on page 29
for more information.
PTSIZE nnn.nn Specifies the point size of the default font, if it is an outline
font. Valid values are 4 to 999.75. The default is 12.
PITCH nn.nn Specifies the pitch to use for the default font, if the font is
bitmapped (raster). Valid values are .44 to 99.99. The default
is 10.
108
Infoprint 32 and Infoprint 40: User’s Guide