IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual Download Page 68

Page: 68 / 296

Insert the paper into the tray. The paper should fit easily between the
guides. Make sure the paper fits snugly in the indicated corner of the tray.

Notes:

Make sure that the height of the paper stack does not exceed the paper
limit mark. The paper should lay flat in the tray; it should not be
bowed.

Failure to adjust the paper guides to the correct paper size could result
in a paper jam.

Insert the correct paper size label into the label slot on the top of the paper
tray.

hc3u175F

Infoprint 32 and Infoprint 40: User’s Guide

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer









































































































































































































































































































Search results

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer

Reviews:

Related manuals for 4332-004 - InfoPrint 40 B/W Laser Printer

Brands by name

Popular brands

IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Search results

Summary of Contents for 4332-004 - InfoPrint 40 B/W Laser Printer

Reviews:

Related manuals for 4332-004 - InfoPrint 40 B/W Laser Printer

Brands by name

Popular brands