IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 110 / 296

Paper Menu Item Value Description
TRAY SWITCH ON*
OFF (continued from previous page...)
v
Tray switching is also automatic when the printer first
looks for a tray to print a PostScript job. In other words,
when you first send a PostScript job to the printer, the
printer selects the first tray it finds that has the correct
paper size, regardless of whether tray switching is on or
the tray is protected. You cannot turn this type of
switching off; nor can you “protect” trays from being
included in this switching sequence.
If the initial tray runs out of paper, however, regular tray
switching and tray protection rules apply. (No switching
if TRAY SWITCH is OFF, no selecting paper from
“protected” trays.)
v
If the printer cannot find the correct size paper in any
tray, it may display
011 LOAD paper-size IN tray
, where
the tray is the last tray the printer checked, not
necessarily the tray you requested.
TRAY RENUM OFF*
1<>2
1<>3
1<>4
1<>5 Specifies tray renumbering:
v
OFF—no tray renumbering
v
1<>2—tells the printer to treat TRAY 1 as TRAY 2, and
TRAY 2 as TRAY 1.
v
1<>3—tells the printer to treat TRAY 1 as TRAY 3, and
TRAY 3 as TRAY 1.
v
1<>4—tells the printer to treat TRAY 1 as TRAY 4, and
TRAY 4 as TRAY 1.
v
1<>5—tells the printer to treat TRAY 1 as TRAY 5, and
TRAY 5 as TRAY 1.
Note: Tray renumbering does not apply to PostScript jobs.
98
Infoprint 32 and Infoprint 40: User’s Guide