IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 32 / 296

4.
Attach the other end of the cable into the parallel interface slot on your PC
or workstation.
Note: If there is a ground strap on your cable, attach it to the attachment
screw provided.
5.
Plug the printer power cord into the wall and switch the printer on.
Installing Printer Drivers
Before you can print from your PC or workstation to your printer, you need
to install the correct printer driver on your system. The printer includes a
CD-ROM which contains PCL5e and PostScript printer drivers for numerous
systems. (See the CD-ROM for a complete list.) To use the setup wizard
provided on the CD-ROM, choose Set up printer or Browse products, click
Start wizard, and follow the instructions.
Notes:
1. For your printer driver to work effectively, you must indicate to your
printer driver what features are installed on your printer, for example,
what trays are installed, and how much memory is installed. Therefore,
after you install a driver, make sure you update it to indicate the features
installed on your printer. Also, if you install (or remove) a feature at a
later date, make sure you update your printer driver.
2. Each operating system has unique driver installation procedures. For
specific installation instructions, see the driver installation procedure and
README documentation for your operating system.
3. Your printer may include additional drivers not included in this list.
4. Printer drivers are also available as follows:
a. Access the IBM Printing Systems Home Page at:
http://www.printers.ibm.com
b. Go to the printer driver you need and follow the download
instructions.
20
Infoprint 32 and Infoprint 40: User’s Guide