IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 180 / 296

group in the socket closest to the center of the controller card.
45°
hc3u255F
Flash memory,
DBCS SIMMs
or IPDS SIMMs
DRAM SIMMs
5. Hold the SIMM with the notched edge toward the socket and the notch
toward the network card slots. Insert the SIMM at a 45 degree angle and
move it into position in the socket. Using your thumbs, press with even
pressure on both ends of the SIMM until the SIMM is firmly seated in the
socket.
Make sure the clips on either end of the socket snap into place to hold the
SIMM. If necessary, use your thumbs to move the clips upright into the
grooves to lock the SIMM in place.
6.
Verify that the SIMM is correctly installed in the socket by looking at its
position from the sides of the controller card.
7. Reinstall the controller card. See “Reinstalling the Controller Card” on
page 170.
Installing a Hard Drive
Important!
Follow the instructions for handling static-sensitive devices described on
page 165.
Installing a hard drive in your printer will allow you to print jobs with
multiple collated copies. Use the following procedure to install a hard drive:
1. Switch off the printer.
168
Infoprint 32 and Infoprint 40: User’s Guide