Hyundai R 160 LC-3, Service Manual

Page: 425 / 459

8 - 112
DISASSEMBLY
Before the disassembly, clean the turning
joint.
Remove bolts(14), washer(15) and cover
(3).
14
15
3
6
10
11
4
5
9
7
1
Secure with hand
Work bench
V block
Wooden block
2)
Remove six slipper seals(7) and O-ring(9)
from hub(1).
(5)
Place hub(1) on a V-block and by using a
wood buffer at the shaft end, hit out
shaft(2) to about 1/2 from the hub with a
hammer.
Take care not to damage the shaft(2)
when remove hub(1) or rest it sideway.
Put a fitting mark on hub(1) and shaft(2).
(4)
Ɠ
Ɠ
Remove shim(6) and O-ring(10).
Remove retainer ring(11), spacer(4) and
shim(5).
(2)
(3)
(1)