manualshive.com logo in svg

Hyundai R 160 LC-3, Service Manual, Page: 418 / 459

Share
Download
Hyundai R 160 LC-3 Service Manual Download Page 418

8 - 105

Assemble spring(10) into casing.
Assemble reducing valve subassembly
into casing.
Assemble them to their original positions.

(4)

Ɠ

Stand spool vertically with its bottom
placed on flat workbench, and with spring
seat pushed down, put two pieces of
semicircular stopper(9) on spring seat
without piling them on.
Assemble stopper(9) so that its sharp
edge side will be caught by head of spool.
Do not push down spring seat more than
6mm.

(3)

Ɠ

Put shim(6), springs(7, 30) and spring
seat(8, 31) onto spool(5) in this order.

(2)

ASSEMBLY

Tighten hexagon socket head plug(2) to
the specified torque.
Tighten two bolts alternately and slowly.

(1)

Ɠ

4)

Summary of Contents for R 160 LC-3












































































































































































































































































































































































































































































Reviews:

No comments