Hyundai R 160 LC-3, Service Manual

Page: 301 / 459

7 - 25
4. TRAVEL DEVICE
MOTOR 1)
Part name General view
Standard
dimension
Remedy
ň Sliding surface has a deep
score or is roughened.
ň The clearance between the
piston and the cylinder block
bore is large.
ň
Shoe ball has a large gap.
ň Sliding surface has a deep
score or is roughened.
ň Bore is worn very much.
ň
Wear or breakage occurred
during meshing of gear teeth.
ň
Sliding surface has a deep
cut, seizure, uneven wear or
is roughened.
ň Sliding surface has a deep cut,
seizure, uneven wear or is
roughened.
ň
Sliding surface has a deep cut,
seizure, uneven wear or is
roughened.
ň
The swash plate has deep
score and seizure in the face
in contact with steel ball(174).
ň Sliding surface of oil seal(163)
is deeply scored or roughened.
ň Meshing gear teeth have been
abnormally worn or broken.
ň Sliding surface is deeply
scored or roughened.
ň The clearance between the
valve and base plate(103) is
large.
ň
Sliding surface is deeply
scored or roughened.
ň
The clearance between the
collar and valve(145) is large.
ň
Sliding surface is deeply
scored or roughened.
ň
The clearance between the
spring guide and valve(145) is
large.
Piston
subassembly(159)
Cylinder block(157)
Valve plate(158)
Retainer plate(160)
Retainer holder(161)
Swash plate(162)
Shaft(156)
Valve(145)
Collar(142)
Spring guide(144)
Replace cylinder
block kit
Replace cylinder
block kit
Replace cylinder
block kit
Replace cylinder
plate kit
Replace swash
plate steel ball
Replace shaft
Replace base plate
subassembly
Replace base plate
subassembly
Replace base plate
subassembly
Recommended
replacement value
- -
0.035 0.050
0.15 0.4
- -
- -
- -
- -
- -
- -
- -
- -
- -
0.025 0.050
- -
0.030 0.060
- -
0.030 0.060
Depth of sphere
14.3
Depth of sphere
14.5