Hyundai R 160 LC-3, Service Manual, Page: 306 / 459

7 - 30
7. TURNING JOINT
Maintenance standards Remedy
Plating worn or peeled due to seizure or contamination Sliding surface with
sealing sections
Sliding surface
between body and
stem other than
sealing section
Sliding surface
with thrust plate
Sliding surface
with thrust plate
-
-
-
Replace
Replace
Smooth with oilstone
Replace
Smooth
Smooth
Replace
Smooth
Replace
Replace
Replace
Part name
Body,
Stem
Cover
Seal set
Worn abnormality or damaged more than 0.1mm
(0.0039in) in depth due to seizure contamination
Damaged more than 0.1mm(0.0039in) in depth
Worn more than 0.5mm(0.02in) or abnormality
Worn less than 0.5mm(0.02in)
Damage due to seizure or contamination remediable
within wear limit (0.5mm
(
(0.02in)
Worn more than 0.5mm(0.02in) or abnormality
Worn less than 0.5mm (0.02in)
Damage due to seizure or contamination remediable
within wear limit (0.5mm
(
(0.02in)
Extruded excessively from seal groove square ring
Slipper ring 1.5mm(0.059in) narrower than seal
groove, or narrower than back ring
Worn more than 0.5mm(0.02in) ~ 1.5mm(MAX)
(0.059in)
ş
ş
ş
ş
ş
ş
ş
ş
ş
ş
ş
Square ring
Extrusion
1.5mm(max)
(0.059in)