Hyundai R 160 LC-3, Service Manual

Page: 336 / 459

8 - 23
Remove snap ring(858) and take out
fulcrum plug(614) and adjusting plug
(615).
Fulcrum plug(614) and adjusting plug
(615) can easily be taken out with M6 bolt. (8)
Ɠ
Remove snap ring(814) and take out
spring seat(653), return spring(654) and
sleeve(651).
Sleeve(651) is fitted with snap ring(836).
When removing snap ring(814), return
spring(654) may pop out.
Take care not to lose it. (7)
Ɠ
Ɠ
Remove hexagon socket head screws
(436, 438) and remove pilot cover(641).
After removing pilot cover, take out set
spring(655) from pilot section.
(6)
After removing cover(C, 629) subassembly,
take out outer spring(625), inner spring
(626) and spring seat(C, 624) from
compensating section.
Then draw out adjusting ring(Q, 645), pilot
spring(646) and spring seat(644) from
pilot section.
Adjusting ring(Q,645) can easily be drawn
out with M4 bolt.
(5)
Ɠ