14
WHEELS
14.7
Rear wheel
14.7.1
Removing the rear wheel
Position spacing tube
8.
Press in the new bearing
(D
all the way using a suitable tool.
•
Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
Grease new shaft seal rings @ and
O
and press in until they are flush.
Finishing work
Install the front wheel. (
llill
p. 94)
Preparatory work
Raise the motorcycle with a lift stand. (
a
p. 11)
Main work
Press the brake caliper onto the brake disc by hand in order to push back the
brake piston.
•
Info
96
I
Make sure when pushing back the brake piston that you do not press the
brake caliper against the spokes.
Remove nut
O.
Remove chain adjuster @. Withdraw wheel spindle
(D
only enough to allow the
rear wheel to be pushed forward.
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Cover the components to protect them against damage.
Warning
Danger of accidents
Damaged brake discs reduce the braking effect.
- Always lay the wheel down in such a way that the brake disc is not
damaged.
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of
the swingarm.
Info
Do not operate the foot brake lever when the rear wheel is removed.
Summary of Contents for FE 350 2015
Page 2: ......