HUSABERG FE 450 AUS, Repair Manual

Page: 82 / 285

13/BRAKE SYSTEM
80
100393-10
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws

.
–
Remove cover

with membrane

.
–
Add brake fluid to level

.
Guideline
Measurement of

5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 263)
–
Position the cover with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
15.6
Checking the front brake linings
Warning
Danger of accidents
Reduced braking due to worn brake linings.
–
Change worn brake linings without delay.
100394-10
–
Check the brake linings for minimum thickness

.
Minimum thickness

≥
1 mm (
≥
0.04 in)
» If the minimum thickness is less than specified:
–
Change the front brake linings. ( p. 80)
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the front brake linings. ( p. 80)
15.7
Changing the front brake linings
Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally.
Warning
Skin irritations Brake fluid can cause skin irritation on contact.
–
Avoid contact with skin and eyes, and keep out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
If brake fluid gets into your eyes, rinse thoroughly with water and contact a doctor immediately.
Warning
Danger of accidents
Reduced braking efficiency due to old brake fluid.
–
Change the brake fluid of the front and rear brakes according to the service schedule.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.