HUSABERG FE 450 AUS, Repair Manual

Page: 150 / 285

30/ENGINE ASSEMBLY
148
20.33
Installing the camshaft
300517-10
–
Wrap the timing chain around the camshaft. Push the camshaft into the bearing
seats.
The cylinder head

and camshaft

markings are lined up with each other.
Info
Ensure that the crankshaft is at top dead center (TDC).
300303-11
–
Position camshaft support plate

. Mount and tighten screw

.
Guideline
Screw, camshaft bearing
support M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
20.34
Installing the timing chain tensioner
200074-12
–
Position timing chain tensioner

and insert it with new O-ring

.
–
Mount and tighten plug

with new seal ring

.
Guideline
Plug, timing chain tensioner M24x1.5 30 Nm
(22.1 lbf ft)
300377-10
–
Remove screw

and press the timing chain tensioner toward the timing chain
using the special tool.
Release device for timing chain tensioner (77329051000) ( p. 272)
–
Mount and tighten screw

.
Guideline
Screw, unlocking of timing chain ten-
sioner M10x1 10 Nm (7.4 lbf ft)
20.35
Checking the valve clearance
300300-11
–
Remove special tool

.
–
Crank over the engine repeatedly.
–
Position the engine at ignition top dead center (TDC). ( p. 100)