HUSABERG FE 450 AUS, Repair Manual

Page: 23 / 285

01/FORK, TRIPLE CLAMP
21
200705-10
–
Mount shim stack

.
Info
Mount the smaller shims below.
–
Mount pistons

with O-ring

.
Info
The side with the largest inside diameter

faces upward.
–
Grease the piston O-ring.
Fork oil (SAE 5) ( p. 263)
200706-10
–
Mount washer

.
–
Mount spring

with the tighter coil facing downward.
–
Mount and tighten nut

.
Guideline
Compression damping fitting nut M6x0.5 3 Nm (2.2 lbf ft)
Info
The washer

must have freedom of movement relative to the spring force.
–
Secure the nut by locking.
–
Extract the compression damping fitting.
5.18
Assembling the cartridge
Info
The steps are identical for both fork legs.
200715-10
–
Clamp in the piston rod.
Clamping stand (T14016S) ( p. 276)
–
Mount valve

of the rebound damping, with the spring and O-ring.
–
Grease the O-ring.
Lubricant (T158) ( p. 265)
–
Mount spring

.
200718-10
–
Grease tap rebound

O-ring.
Lubricant (T158) ( p. 265)
–
Mount and tighten the tap rebound.
Guideline
Tap rebound M9x1 18 Nm
(13.3 lbf ft) Loctite ® 2701
–
Position spring

.
200719-10
–
Mount shim stack

.
Info
Mount the smaller shims below.
–
Press the shim stack downward against the spring force.
Info
The shim stack must be pressed downward over the collar.
–
Mount piston

with the piston ring.