HUSABERG FE 450 AUS, Repair Manual

Page: 128 / 285

30/ENGINE - WORK ON THE INDIVIDUAL PARTS
126
200189-10
–
Mark the valves corresponding to their installation position.
Info
Place the valves in a carton corresponding to their installation position in
and label them.
19.31
Changing the camshaft bearing
300519-10
–
Mount the cylinder head.
Clamping plate (75029050000) ( p. 271)
–
Remove the camshaft bearing using the special tool.
Push-out drift (75029051000) ( p. 271)
300520-10
–
Remove the small camshaft bearing

using the special tool.
Bearing puller (15112017000) ( p. 267)
Insert for bearing puller (15112018100) ( p. 267)
300521-10
–
Press the small camshaft bearing all the way in using special tool

.
Push-in drift (75029044020) ( p. 270)
300522-10
–
Press the large camshaft bearing all the way in using special tool

.
Push-in drift (75029044010) ( p. 270)