HUSABERG FE 450 AUS, Repair Manual

Page: 143 / 285

30/ENGINE ASSEMBLY
141
20.14
Installing the torque limiter
300330-10
–
Mount the washer and torque limiter

.
–
Mount and tighten the screw with the washer.
Guideline
Screw, torque limiter M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
20.15
Installing the free wheel gear
300449-10
–
Mount free wheel gear

.
20.16
Installing the primary gear
300448-10
–
Mount the spring washer.
–
Degrease the cone and thinly apply thread locker to it.
Loctite ® 648™
–
Mount primary gear

.
Info
Turn the free wheel gear back and forth to ease engagement.
20.17
Installing the balancer shaft
300363-10
–
Push balancer shaft

into the bearing seat. Align marking

on the balance
weight with marking

on the primary pinion.
20.18
Installing the outer clutch hub
300328-11
–
Mount collar bushing

and needle bearing

.