HUSABERG FE 450 AUS, Repair Manual

Page: 15 / 285

01/FORK, TRIPLE CLAMP
13
300715-11
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
300714-11
–
Position the brake caliper. Mount and tighten screws

.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Secure the cable with cable binders

.
300713-11
–
Position the brake line and wiring harness. Put the clamp on. Mount and tighten
screws

.
–
Install the front wheel. ( p. 65)
(FE EU, FE AUS)
–
Install the headlight mask with the headlight. ( p. 88)
(FE USA)
–
Install the start number plate. ( p. 64)
5.10
Removing the fork protector
–
Remove the fork legs. ( p. 12)
300716-10
–
Remove screws

on the left fork leg. Lift off the fork protector.
–
Remove the screws on the right fork leg. Lift off the fork protector.
5.11
Installing the fork protector
300716-10
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Install the fork legs. ( p. 12)