HUSABERG FE 450 AUS, Repair Manual

Page: 48 / 285

04/SHOCK ABSORBER, SWINGARM
46
200756-11
–
Mount seal ring retainer

and slide it under the ring groove.
–
Mount lock ring

.
Info
Do not scratch the inner surface.
–
Pull out the piston rod in order that the seal ring retainer fits closely against the
lock ring.
200778-10
–
Mount locking cap

of the shock absorber tube.
–
Bleed and fill the shock absorber. ( p. 47)
–
Fill the shock absorber with nitrogen. ( p. 49)
200779-10
–
Mount rubber cap

of the reservoir.
–
Turn adjusting ring

completely down toward the bottom.
200780-10
Alternative 1
–
Turn adjusting screw

clockwise with a screwdriver up to the last perceptible
click.
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
–
Turn adjusting screw

clockwise with an open end wrench until it stops.
–
Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort 2 turns
Standard 1.5 turns
Sport 1 turn
–
Turn adjusting screw

clockwise up to the last perceptible click.
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort 26 clicks
Standard 24 clicks
Sport 22 clicks