HUSABERG FE 450 AUS, Repair Manual

Page: 46 / 285

04/SHOCK ABSORBER, SWINGARM
44
200767-10
–
Mount rebound damping washer

.
–
Mount compression damping shim stack

with the smaller shims facing down-
ward.
200768-10
–
Grind piston

on both sides on a surface plate using 1200 grit sandpaper.
–
Clean the piston.
–
Mount the piston.
Guideline
View

Top view of piston
View

Bottom view of piston
200769-10
–
Mount rebound damping shim stack

with the smaller shims at the top.
–
Apply thread locker to the threads of the piston rod.
Loctite ® 2701
–
Screw on mount

to the point where the piston can still be turned.
200770-10
–
Mount compression damping shim stack

with the smaller shims at the bottom.
200771-10
–
Grind piston

on both sides on a surface plate using 1200 grit sandpaper.
–
Clean the piston.
–
Mount the piston.
Guideline
View

Top view of piston
View

Bottom view of piston
200772-10
–
Mount rebound damping shim stack

with the smaller shims facing upwards.
–
Grease the threads of the mount.
Lubricant (T152) ( p. 266)
–
Mount nut

but do not tighten yet.