HUSABERG FE 450 AUS, Repair Manual

Page: 141 / 285

30/ENGINE ASSEMBLY
139
300367-11
–
Mount the left section of the engine case. If necessary, strike it lightly with a rub-
ber mallet.
Info
Do not use the screws to pull the two sections of the engine case together.
–
Mount screws

and, once all screws of the left section of the engine case have
been mounted, tighten them.
Guideline
Screw, engine housing M6x75 10 Nm (7.4 lbf ft)
–
Mount screw

and, once all screws of the left section of the engine case have
been mounted, tighten it.
Guideline
Screw, engine housing M6x70 10 Nm (7.4 lbf ft)
–
Mount screws

and tighten all screws in a crisscross pattern.
Guideline
Screw, engine housing M6x60 10 Nm (7.4 lbf ft)
20.8
Installing the locking lever
300364-11
–
Mount locking lever

with the washer, sleeve and spring.
–
Mount and tighten screw

.
Guideline
Screw, locking lever M5 6 Nm
(4.4 lbf ft) Loctite ® 243™
20.9
Installing the shift drum locating unit
300336-11
–
Push away locking lever

from the shift drum locating unit and position the shift
drum locating unit

.
Info
The flat areas of the shift drum locating unit are not symmetric.
–
Relieve tension from the locking lever.
–
Mount and tighten screw

.
Guideline
Screw, shift drum locating M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
20.10
Installing the shift shaft
300516-11
–
Slide shift shaft

with the washer into the bearing seat.
–
Push sliding plate

away from the shift drum locating unit. Insert the shift shaft
all the way.
–
Let sliding plate

engage in the shift drum locating unit.