HUSABERG FE 450 AUS, Repair Manual

Page: 18 / 285

01/FORK, TRIPLE CLAMP
16
200650-01
–
Drain the fork oil.
Info
Pull out and push in the piston rod several times in order to pump out the
cartridge until it is empty.
200691-10
–
Clamp in the fork leg with the axle clamp.
–
Unscrew and remove the compression damping fitting

.
Info
Place a fluid collector beneath it, as usually some oil will drain out.
200653-01
–
Remove the cartridge.
200741-10
–
Remove dust boot

.
–
Remove fork protector ring

.
Info
Disassembly of the fork protector ring is not necessarily required for the fur-
ther repair.
200742-10
–
Remove lock ring

.
Info
The lock ring has a coarsely finished end against which the screwdriver can
be placed.
200716-10
–
Warm up the outer tube in the lower sliding bushing area of

.
Guideline
50 °C (122 °F)
–
Jerk the outer tube out of the inner tube.
Info
The lower sliding bushing

must be pulled out of its bearing seat when
doing this.