HUSABERG FE 450 AUS, Repair Manual

Page: 14 / 285

01/FORK, TRIPLE CLAMP
12
5.7
Positioning the fork protection
100381-11
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and cable harness. Put the clamp on, and mount and
tighten screws

.
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
5.8
Removing the fork legs
–
Remove the front wheel. ( p. 65)
(FE EU, FE AUS)
–
Remove the headlight mask with the headlight. ( p. 88)
(FE USA)
–
Remove the start number plate. ( p. 63)
300713-10
–
Remove screws

and take off the clamp.
300714-10
–
Remove cable binders

.
–
Remove screws

and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to the side.
300715-10
–
Unscrew screws

. Take out the left fork leg.
–
Unscrew screws

. Take out the right fork leg.
5.9
Installing the fork legs
300724-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws

toward the front.