HUSABERG FE 450 AUS, Repair Manual

Page: 162 / 285

38/LUBRICATION SYSTEM
160
23.8
Installing the oil filter
100456-10
–
Insert oil filter

into the oil filter housing.
–
Oil O-ring

of the oil filter cover.
–
Mount oil filter cover

.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
23.9
Filling up with engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
100451-10
–
Remove screw connection

and add engine oil.
Engine oil 1.35 l (1.43 qt.) Engine oil (SAE 10W/50) ( p. 263)
–
Mount and tighten screw cap

.
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. ( p. 158)