HUSABERG FE 450 AUS, Repair Manual

Page: 17 / 285

01/FORK, TRIPLE CLAMP
15
200737-10
–
Loosen Preload Adjuster

.
Pin wrench (T103) ( p. 274)
Info
The Preload Adjuster cannot be taken off yet.
200690-10
–
Take out the fork leg and clamp in with the axle clamp.
Info
Use soft jaws.
200738-10
–
Push the outer tube downward.
–
Pull the spring downward. Place the special tool on the hexagonal part.
Open-end wrench (T14032) ( p. 277)
Info
The preload spacers

should be above the special tool.
200739-10
–
Clamp the special tool in the bench vise. Loosen Preload Adjuster

.
200740-10
–
Remove Preload Adjuster

with the preload spacers

.
–
Remove adjustment tube

.
200649-01
–
Pull the spring downward. Remove the special tool.
–
Remove the spring.