Huawei ECC800-Pro User Manual Download Page 356

Page: 356 / 368

Figure 8-43 Installing a WiFi module

----End

8.2.2 How Can I Prepare and Log in the App?

Prerequisites

App operating environment requirements:
●

The mobile device must run Android 4.0 or later and is not root operating

system (the operating system is not flashed).

●

The mobile device has sufficient battery reserve.

●

You have obtained the IP address of the ECC800-Pro as well as the user name

and password used for WebUI login.

●

A PC with an IP address in the same network segment as that of the ECC800-

Pro is prepared, and the PC has connected to port WAN1 on the EECC800-Pro.

Procedure

Step 1 Download and obtain the app installation package using any of the following

three methods:
●

https://a.vmall.com/

), search for

FusionModule, and tap Download.
a. (Optional) Set the pad language to Chinese.
b. Open the browser on the pad, enter

www.baidu.com

in the address box,

search for Huawei AppGallery, select Ordinary Download, and tap

Save.

Install the Huawei AppGallery. If the downloaded file exists in the drop-

down list box, tap the file to install the Huawei AppGallery. If the

downloaded file does not exist in the drop-down list box, choose File >

Local on the desktop, find the Download folder, and click the Huawei

AppGallery installation package.

NO TICE

After you open the Huawei AppGallery, select NOT NOW if "New

Version" is displayed.

ECC800 Data Center Controller

User Manual (for ECC800-Pro)

8 FAQ

Issue 02 (2020-09-07)

345

Summary of Contents for ECC800-Pro

















































































































































































































































































































































































Search results

Summary of Contents for ECC800-Pro

Reviews:

Related manuals for ECC800-Pro

Brands by name

Popular brands

Huawei ECC800-Pro, User Manual

Search results

Summary of Contents for ECC800-Pro

Reviews:

Related manuals for ECC800-Pro

Brands by name

Popular brands