2. Add an Envicool air conditioner.
Table 8-8 Adding an Envicool CRU
Path
Parameter
Setting
Choose
System
Settings >
Device
Management
and click Add
Device.
Device
Attribute
Select Air Conditioner from the drop-
down list box.
Device Type
Select ENVICOOL-CRU from the drop-
down list box.
Connect To
Select ECC800 from the drop-down list
box.
NOTE
If the other end of the straight-through cable is
connected to the COM port on the UIM20A,
select UIM.
Communicati
ons Port
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the Envicool
CRU is connected to the COM1 port on the
ECC800-Pro. If the Envicool CRU is connected to
another port, enter the number of the
connected port.
Device
Address
In this example, Device Address is set to 1.
During actual configuration, set the device
address for the air conditioner based on
the actual situation.
Table 8-9 Adding an Envicool IFX Termina device
Path
Parameter
Setting
Choose
System
Settings >
Device
Management
and click Add
Device.
Device
Attribute
Select Air Conditioner from the drop-
down list box.
Device Type
Select Envicool-IFX Terminal from the
drop-down list.
Connect To
Select ECC800 from the drop-down list
box.
NOTE
If the other end of the straight-through cable is
connected to the COM port on the UIM20A,
select UIM.
ECC800 Data Center Controller
User Manual (for ECC800-Pro)
8 FAQ
Issue 02 (2020-09-07)
Copyright © Huawei Technologies Co., Ltd.
272