Installing and Configuring FASTP Network Print
Processes
Spooler FASTP Network Print Processes Manual — 427528-006
2 - 31
Using the CONTROL, CONTROLBUF, and
SETMODE Operations
buffer
contains the two-byte string <28,46> to be used as an alternate
shift-to-
one-byte
string.
CONTROLBUF 113 — FONT Job Sectioning
CONTROLBUF 113 within a FONT job limits the scope of the following data to one or
more specific location names. This limitation applies until the next end-of-job or
CONTROLBUF 113 is encountered.
The Spooler allows a maximum of 255 FONT jobs. The FASTP network print
processes allow sites to have the effect of a large number of FONT jobs by allowing a
single FONT job to contain many FONT sections. CONTROLBUF 113 allows up to
4095 sections to be described for each FONT job. The syntax of CONTROLBUF 113
is:
where
location
is the Spooler location in internal file name format. Location names must be blank
filled to 16 characters in length.
Example 2-5
contains a sample Font utility script file that splits a FONT job into two
sections. The first section applies to a single location. The second section applies to
two different locations.
CONTROLBUF 113
location
;
Example 2-5. Sample Font Utility Script File Using CONTROLBUF 113
START-FONT
?FONT COLORGROUP1
! This section only applies to #LASER.BLUE
?CONTROLBUF 113 "#LASER BLUE ";
"This is font job data for blue jobs"
"This is font job data for blue jobs"
"This is font job data for blue jobs"
"This is font job data for blue jobs"
! This section applies to #LASER.PINK and #LASER.RED
?CONTROLBUF 113 "#LASER PINK "
"#LASER RED ";
"This is font job data for pink and red jobs"
"This is font job data for pink and red jobs"
"This is font job data for pink and red jobs"
"This is font job data for pink and red jobs"
?END-FONT
?START-LOCATIONS
#LASER.BLUE COLORGROUP1 $LASER.#A
#LASER.PINK COLORGROUP1 $LASER.#A
#LASER.RED COLORGROUP1 $LASER.#A