manualshive.com logo in svg

HP Spooler FASTP, Manual, Page: 47 / 368

Share
Download
HP Spooler FASTP Manual Download Page 47

Installing and Configuring FASTP Network Print 
Processes

Spooler FASTP Network Print Processes Manual — 427528-006

2 - 21

Configuring a FASTCNFG File

Case Sensitivity

FASTCNFG file syntax is not case sensitive. However, some attribute values can be 
case sensitive (for example, a password value).

Comments 

Comments can be inserted anywhere in the FASTCNFG file and must follow an 
exclamation mark (!). Anything following an exclamation mark is considered to be a 
comment until another exclamation mark or the end of the line is encountered. For 
example:

!This is legal!

SERVER = server-name

!This is legal!SERVER = server-name

!This is legal

SERVER = server-name

!This is not legal SERVER = server-name

Table 2-6.  FASTCNFG File-Formatting Rules Summary

Format Element

Rule

Case sensitivity

Syntax is not case sensitive. Some values can be case 
sensitive.

Comments

Comments can be inserted anywhere in the FASTCNFG 
file and must follow an exclamation mark (!). 

Line continuation

Line continuation does not require any special characters 
or format as long as you do not split keywords, keyword 
values, attributes, or attribute values.

Separator 
characters

Keywords and keyword values must be separated by one 
or more blank spaces. Attributes and attribute values must 
be separated by an equal sign (=). 

Starting position 
relative to the 
beginning of a 
line

Keywords and attributes can begin in any position on a line.

Summary of Contents for Spooler FASTP

















































































































































































































































































































































































Reviews:

No comments