manualshive.com logo in svg

HP Spooler FASTP, Manual, Page: 138 / 368

Share
Download
HP Spooler FASTP Manual Download Page 138

Installation, Configuration, and Usage 
Considerations for FASTPSMB

Spooler FASTP Network Print Processes Manual — 427528-006

4 - 14

Optional DEVICE Attributes for FASTPSMB

TYPE = 

{

DOMAIN |

GATEWAY |

POOL

}

specifies the object type for the RESOURCE attribute. 

For NBT and NBX, the object type must be 

DOMAIN

. 

For TLAM (D-series only), the object type is configured with SCF as part of TLAM 
and Multilan configuration as follows: 

A 

DOMAIN

 object represents a particular LAN.

A 

GATEWAY

 object represents an MLAD.

A 

POOL

 object represents a resource on an adapter card used to store 

NetBIOS names and sessions.

The TYPE specification is optional. If the TYPE attribute is not specified, the 
default object type is 

DOMAIN

.

USERNAME = 

account-name

specifies an account name (also called a user ID), if an account name is required, 
for user-mode access to the SMB LAN print queue. 

Establishing an account name is part of the SMB print-server application 
processing. This name is used by the FASTPSMB print process when it 
establishes a NetBIOS session with the SMB print-server application. 

This attribute value is case sensitive.

USERPWORD = 

account-password

specifies an account password, if a password is required, for user-mode access to 
the SMB LAN print queue. Passwords are required for all user IDs except guest 
IDs.

Establishing an account password is part of the SMB print-server application 
processing. This password is used by the FASTPSMB print process (in conjunction 
with the account name) when it establishes a NetBIOS session with the SMB print-
server application. 

This attribute value is case sensitive.

Summary of Contents for Spooler FASTP

















































































































































































































































































































































































Reviews:

No comments