manualshive.com logo in svg

HP Spooler FASTP, Manual, Page: 285 / 368

Share
Download
HP Spooler FASTP Manual Download Page 285

EMS Messages

Spooler FASTP Network Print Processes Manual — 427528-006

B - 73

FASTP EMS 512 Text Messages

Cause. 

This message applies to FASTPNOV only. The specified parameter had an 

invalid value specified n the FASTCNFG file. 

Effect. 

No printing occurs, the Spooler job is requeued, and the Spooler device is 

placed offline.

Recovery. 

Correct the parameter, and restart the Spooler device. (Depending on the 

device configuration, the device might restart automatically.)

512

proc-num

is the process number (CPU, PIN) of the process.

device-name

is the Spooler device name.

param-name

is one of the required attributes for FASTPNOV devices:

SERVER

QUEUE

USERID

PASSWORD

or is one of the required attributes for FASTPSMB devices:

LAN

PATH

RESOURCE

cnfg-file

is the name of the FASTCNFG file. 

Cause. 

This message applies to FASTPNOV and FASTPSMB only. The specified 

parameter was not found in the FASTCNFG file. 

Effect. 

No printing occurs, the Spooler job is requeued, and the Spooler device is 

placed offline.

proc-num

 DEV: 

device-name

 

param-name

 entry in 

cnfg-file 

is 

missing

Summary of Contents for Spooler FASTP

















































































































































































































































































































































































Reviews:

No comments