manualshive.com logo in svg

HP Spooler FASTP, Manual, Page: 107 / 368

Share
Download
HP Spooler FASTP Manual Download Page 107

Installation and Configuration Considerations for 
FASTPTCP

Spooler FASTP Network Print Processes Manual — 427528-006

3 - 39

FASTCNFG DEVICE Attributes for Devices 

Connected to Line Printer Daemons (LPDs)

USERID = 

userid

supplies a case-sensitive user ID that is sent in the

 P - User 

identification

 control file record. The user ID should correspond to a user ID 

on the LPD server.

PRINTBANNER = {NO|YES}

if set to YES, FASTPTCP formats the 

L Print Banner Page

 command as part 

of the control file sent to the LPD. The default value is NO. If this attribute is 
included, a job name should be provided with JOBNAME, otherwise FASTPTCP 
constructs a job name from the spooler/report/location/job number of the original 
Spooler job.

JOBNAME = 

jobname

                                     `

provides a job name on a device basis for the

 J - Job name for banner 

page

 control-file record sent to the LPD server. This parameter is used only if 

PRINTBANNER=YES.

BANNERCLASS = 

banner-class

supplies a banner class name for the 

C Class for banner page

 control-file 

record sent to the LPD server. This parameter is used only if 
PRINTBANNER=YES.

BURSTBANNER = 

username

supplies the user name for burst pages included in the 

L - Print banner 

page

 control-file record sent to the LPD server. This parameter is used only if 

PRINTBANNER=YES.

SOURCEFILE = 

source-filename

supplies a token source file name to be used in the 

N - Name of source file

 

control-file record. Note that the source file name is given on a device basis; if this 
attribute is used, all jobs sent to the device are sent with the same source file 
name.

UNLINK = [YES | NO]

if specified as YES, FASTPTCP includes the 

U - Unlink data file 

command in the control file sent to the LPD server. The default value is YES, which 
causes the print file to be deleted after printing on the LPD server.

Summary of Contents for Spooler FASTP

















































































































































































































































































































































































Reviews:

No comments