HP FlexNetwork 5130 HI series, Command Reference Manual

Page: 240 / 306

232
display mvrp state
Use display mvrp state to display the MVRP state of a port in a VLAN.
Syntax
display mvrp state interface interface-type interface-number vlan vlan-id
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number : Specifies a port by its type and number.
vlan vlan-id : Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
Examples
# Display the MVRP state of GigabitEthernet 1/0/1 in VLAN 2.
<Sysname> display mvrp state interface gigabitethernet 1/0/1 vlan 2
MVRP state of VLAN 2 on port GE1/0/1:
Port VLAN App-state Reg-state
------------------------ ------ ----------- -----------
GE1/0/1 2 VP IN
Table 52 Command output
Field Description
MVRP state of VLAN 2
on port GE1/0/1
MVRP state of GigabitEthernet 1/0/1 in VLAN 2.
App-state
State of the attribute that the local participant declares to its peer participant:
•
VO —Very anxious observer.
•
VP —Very anxious passive.
•
VN —Very anxious new.
•
AN —Anxious new.
•
AA —Anxious active.
•
QA —Quiet active.
•
LA —Leaving active.
•
AO —Anxious observer.
•
QO —Quiet observer.
•
AP —Anxious passive.
•
QP —Quiet passive.
•
LO —Leaving observer.
Reg-state
Registration state of the attribute declared by the peer participant on the local
participant:
•
IN —Registered.
•
LV —Previously registered, but now being unregistered.
•
MT —Not registered.