102
Syntax
link-aggregation
port-priority
port-priority
undo
link-aggregation
port-priority
Default
The port priority of an interface is 32768.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
port-priority
: Specifies the port priority in the range of 0 to 65535. The smaller the value, the higher
the port priority.
Examples
# Set the port priority to 64 for Layer 2 Ethernet interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] link-aggregation port-priority 64
Related commands
lacp system-priority
link-aggregation selected-port maximum
Use
link-aggregation selected-port maximum
to set the maximum number of Selected ports
allowed in an aggregation group.
Use
undo link-aggregation selected-port
maximum
to restore the default.
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
Default
The maximum number of Selected ports for an aggregation group is 32.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
number
: Specifies the maximum number of Selected ports allowed in an aggregation group. The
value range for this argument is 1 to 32.
Usage guidelines
Executing this command might cause some of the Selected ports in an aggregation group to become
Unselected ports.
The maximum number of Selected ports allowed in the aggregation groups must be the same for the
local and peer ends.
Summary of Contents for FlexNetwork 5130 HI series
Page 302: ...294 ...
