HP FlexNetwork 5130 HI series, Command Reference Manual

Page: 23 / 306

15
Field Description
•
F(a) —Autonegotiated full duplex.
•
H —Half duplex.
•
H(a) —Autonegotiated half duplex.
Type
Link type of the interface:
•
A —Access.
•
H —Hybrid.
•
T —Trunk.
PVID Port VLAN ID.
Cause
Cause for the physical link state of an interface to be DOWN :
•
Administratively —The port is manually shut down by using the
shutdown command. To restore the physical state of the
interface, use the undo shutdown command.
•
DOWN ( Link-Aggregation interface down ) —When an
aggregate interface is shut down, the physical state of all member
ports of the aggregate interface becomes
DOWN .
•
DOWN (Loopback detection down) —The port is shut down
because the loopback detection module has detected loops.
•
DOWN ( Monitor-Link uplink down ) —The port is shut down
because the monitor link module has detected that the uplink is
down.
•
MAD ShutDown —After an IRF split, the state of all interfaces
except the excluded ports in the IRF in recovery state is set to
DOWN.
•
Not connected —No physical connection exists (possibly
because the network cable is disconnected or faulty).
•
Storm-Constrain —The port is shut down because the unknown
unicast traffic, multicast traffic, or broadcast traffic exceeds the
upper limit.
•
STP DOWN —The port is shut down by the STP BPDU guard
function.
•
Port Security Disabled —The port is shut down by the intrusion
detection mechanism because the port receives illegal packets.
•
Standby —The interface is in the Standby state.
Related commands
reset counters interface
display packet-drop
Use display packet-drop to display information about packets dropped on an interface or multiple
interfaces.
Syntax
display packet-drop { interface [ interface-type [ interface-number ] ] | summary }
Views
Any view
Predefined user roles
network-admin
network-operator