manualshive.com logo in svg

HP FlexNetwork 5130 HI series, Command Reference Manual

Share
Download
HP FlexNetwork 5130 HI series Command Reference Manual Download Page 134

 

126 

display stp tc 

Use 

display stp tc

 to display the incoming and outgoing TC/TCN BPDU statistics for ports.  

Syntax 

display stp 

[ 

instance

 

instance-list

 | 

vlan

 

vlan-id-list 

] 

tc 

[ 

slot

 

slot-number 

] 

Views 

Any view 

Predefined user roles 

network-admin 

network-operator 

Parameters 

instance instance-list:

 Specifies a space-separated list of up to 10 MSTI items. Each item specifies 

an MSTI or a range of MSTIs in the form of 

instance-id1 

[ 

to

 

instance-id2

 ]. The value for 

instance-id2 

must be equal to or greater than the value for 

instance-id1

. The value range for the 

instance-id 

argument is 0 to 4094, and the value 0 represents the CIST. 

vlan

 

vlan-id-list

: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a 

VLAN or a range of VLANs in the form of 

vlan-id1 

[ 

to

 

vlan-id2

 ]. The value for 

vlan-id2 

must be equal 

to or greater than the value for 

vlan-id1

. The value range for the 

vlan-id

 argument is 1 to 4094. 

slot

 

slot-number

: Specifies an IRF member device by its member ID. If this option is not specified, 

this command applies to all member devices in the IRF fabric. 

Usage guidelines 

In STP or RSTP mode, the output is sorted by port name. 

In PVST mode, the command output is sorted by VLAN ID and by port name in each VLAN. 

•

 

If you do not specify a VLAN, this command applies to all VLANs. 

•

 

If you specify a VLAN list, this command applies to the specified VLANs. 

In MSTP mode, the command output is sorted by MSTI ID and by port name in each MSTI. 

•

 

If you do not specify an MSTI, this command applies to all MSTIs. 

•

 

If you specify an MSTI list, this command applies to the specified MSTIs. 

Examples 

# In MSTP mode, display the incoming and outgoing TC/TCN BPDU statistics for all ports on IRF 
member device 1 in MSTI 0. 

<Sysname> display stp instance 0 tc slot 1 

 -------------- STP slot 1 TC or TCN count ------------- 

 MST ID      Port                                    Receive      Send 

 0          GigabitEthernet1/0/1                6            4 

 0          GigabitEthernet1/0/2                0            2 

# In PVST mode, display the incoming and outgoing TC/TCN BPDU statistics for all ports on IRF 
member device 1 in VLAN 2. 

<Sysname> display stp vlan 2 tc slot 1 

 -------------- STP slot 1 TC or TCN count ------------- 

 VLAN ID     Port                                    Receive      Send 

 2           GigabitEthernet1/0/1                6            4 

 2           GigabitEthernet1/0/2                0            2 

Summary of Contents for FlexNetwork 5130 HI series



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands