HP 39gs Master Manual Download Page 67

Page: 67 / 366

Algebraic differentiation is most easily handled in the

SYMB

view of Function. The best method is to define

your function as

F1(X)

and its derivative as

F2(X)

(see below)…

press

Calculator Tip

Doing your differentiation in the Function aplet is much easier and offers

the additional advantage of being able to graph the two functions.

Circular functions

There are two issues that influence the graphing of circular functions,

both related to the scale chosen.

The first one, illustrated on the right, causes

circles to be ellipses if you don’t choose scales

for the x and y axes which are ‘square’ relative
to each other. The two graphs above are both

of the same function

Summary of Contents for 39gs















































































































































































































































































































































































Search results

Summary of Contents for 39gs

Reviews:

HP 39gs, Master Manual, Page: 67 / 366

Search results

Summary of Contents for 39gs

Reviews: