HP 39gs Master Manual Download Page 218

Page: 218 / 366

If you

the menu and press

NOTE

on this particular aplet then you

would see the attached Note shown right. This is quite common with
downloaded aplets. Since they are non-standard, the author often

ensures you have some instructions, although most of the documentation

is generally in a Word

or PDF

document that comes with the aplet.

This particular set of notes consists of a number of pages, but most aplet

Notes are not that extensive. Indeed there may not be one if the

operation of the aplet is fairly obvious.

Most people don’t read notes or explanations so it is debatable how

much use they are anyway.

Some aplets also have sketches attached to them but this consumes

approximately 1Kb of memory per sketch and so was not common on
earlier models which only had 23Kb of RAM memory and so didn’t have

a lot to spare. On the hp 39gs & hp 40gs, as programmers become

used to having plenty of memory to use, aplets have become larger and

more powerful.

An example is shown above right of a sketch from one of the aplets available from HP’s web site called

‘Periodic’. If you installed this aplet on your calculator then this sketch could be viewed via the

SKETCH

key

above the

MATH

key. Sketches can have multiple pages and are covered on page 222.

218

Summary of Contents for 39gs















































































































































































































































































































































































Search results

Summary of Contents for 39gs

Reviews:

HP 39gs, Master Manual, Page: 218 / 366

Search results

Summary of Contents for 39gs

Reviews: