HP 39gs Master Manual Download Page 229

Page: 229 / 366

The process is essentially:

•

Press the

key on the sending calculator and the

key on the receiving calculator.

•

Choose the option for your particular calculator. On an hp 39gs this will be “HP39 (IrDA)” and on an

hp 40gs it will be “HP39/40 (Ser)”.

•

Press

on both calculators and the transmission process will begin.

Calculator Tip

failed.

•

If you begin to receive “Time Out” messages when transmitting aplets or

notes then this means that the connection was lost and the transmission

The two most common causes of this are:

mis-alignment of the two calculators. The infra-red beams must be

correct y lined up and within 8-10 cm.

low batteries. In my experience the transmission process begins to
act up a little before the low battery indicator icon appears at the

top of the screen.

When replac ng the batteries remember that batteries that have been
sitting on the shelf in a supermarket for 12 months or more may be

nearly flat despite never having been used!

229

Summary of Contents for 39gs















































































































































































































































































































































































Search results

Summary of Contents for 39gs

Reviews:

HP 39gs, Master Manual, Page: 229 / 366

Search results

Summary of Contents for 39gs

Reviews: